GA-8IDXH主板BIOS设置－芯片组设置
GA-8IDXH主板BIOS设置－－芯片组设置如下图：
Configure DRAM Timing
SPD 由SPD来设定 SDRAM Timing Control 为自动侦测. (默认值)
Manual 设定 SDRAM Timing Control 为手动.
CAS Latency Time(SDRAM CAS 延迟时间 )
2 设定 SDRAM CAS Latency 为 2.
3 设定 SDRAM CAS Latency 为 3. (默认值)
Active to Precharge Delay
5 设定active to Precharge delay timing is 5 clk.
6 设定active to Precharge delay timing is 6 clk.(默认值)
7 设定active to Precharge delay timing is 7 clk.
SDRAM RAS-to-CAS Delay
3 适用于67 / 83 MHz SDRAM DIMM内存模块.(默认值)
2 适用于100 MHz SDRAM DIMM内存模块.
SDRAM RAS Precharge Time
3 适用于67 / 83 MHz SDRAM DIMM内存模块.(默认值)
2 适用于100 MHz SDRAM DIMM内存模块.
Refresh Mode Select
7.8 usec 设定active to Refresh mode timing is 7.8 usec.
15.6 usec 设定active to Refresh mode timing is 15.6 usec.(默认值)
64 usec 设定active to Refresh mode timing is 64 usec.
DRAM Data Integrity Mode
ECC 设定DRAM Data Integrity Mode by ECC.
Non-ECC 设定DRAM Data Integrity Mode by Non-ECC. (默认值)
DRAM Read Thermal Mgmt
Disabled 关闭DRAM Read Thermal Mgme . (默认值)
Enabled 启动 DRAM Read Thermal Mgme.
Delayed Transaction(延迟讯号交易 )
Disabled 正常运作.
Enabled 用于系统中较慢的ISA装置.(默认值)
AGP Graphics Aperture Size
32 MB 设定AGP Graphics Aperture Size 为 32MB.
64 MB 设定AGP Graphics Aperture Size 为 64MB. (默认值)
Delay Prior to Thermal
816Min Set active CPU Thermal function after booting 16 Min.(默认值)
864Min Set active CPU Thermal function after booting 64 Min.
以上GA-8IDXH主板BIOS设置－－芯片组设置内容出自土豆PE，感谢浏览~！